Brass eyelet Ø2 x 4 mm

Ref: SP108050

Brass - 2 mm diameter x 4 mm total length - bag with 20 units

Choosing the right brass eyelet is very important for two reasons; We will prevent this from leaving your housing and we will also avoid breaking your housing in the guide.

The correct measurement of the electrical connector to be used is determined by the diameter of the hole of the guide and for this reason, the diameter of the connector, plus the thickness of the wires of the electrical cable and the thickness of the braid, that is, the sum of the three (the connector, the wires of the cable and the braid) must allow us to introduce them all together in the housing of the guide with the sufficient resistance so that they do not leave.