3D plastic chassis Buggyra MK R08 - FLY
Ref: SP600901 EVO
ABS flexible plastic - Approx. weight 15 gr - Mono-chassis inline WITH REGULABLE OFFSET - bag with 1 unit + 2 brass bushings + 8 bolt screws to regulate the front and rear axles + 1 Neodymium magnet + 1 plastic spacer + 2 caps and their four M2 x 6 mm Phillips screw
The chassis includes two Universal brass bushings and eight allen screws. Four units M2 x 4 and four units M2 x 6 to precisely regulate the front and rear axle.
The front magnet, included in the chassis, will give you that "plus" when driving it. You will keep all the sensations of piloting a truck but you will have more security in the more closed curves without losing the feeling of piloting. The kit also includes one plastic spacer to place under the magnet and the effect of this is less patent.
In addition, with the magnet is avoided to put any counterweight and all are advantages. You eliminate weight (more acceleration and better braking) and you have the same sensations as if you did, but without its drawbacks.
To secure the screws securing the engine or allen screws, ALWAYS use a contact glue. Never use cyanoclimate glue unless you want it to be "almost" forever.
CHASSIS WITH ADJUSTABLE OFFSET
REMEMBER: BE CAREFUL WHEN ADJUSTING THE BACK BUSHING AND TIGHTENING SOFTLY. IT CAN BREAK, IS PLASTIC.