Special UNIVERSAL screw for 1/32 guides
Ref: SP159950
White zinc plated Steel - M2 x 4 mm - for Phillips screwdriver - bag with 10 units
We have designed specially this screw to occupy minimal space in support of the guide. The thickness of the screw head is only 0.5 mm and it not has protrusions to touch on any body. It is perfectly flat to seat properly and is not necessary to use washers to achieve a proper fit with the support.
As the name suggests, this screw are valid for all types guides they need screw.
Another advantage is that it uses thread M2 and therefore it is easier to put on, always remain centered and straight in to the guide pin and does not damage the plastic.
Logically, as it is a metric screw, you can also give other applications leveraging small thickness of the head (0.5 mm) and diameter (5.5 mm). As the name suggests, this screw are valid for all types guides they need screw.
As the name suggests, this screw are valid for all types guides they need screw.
Another advantage is that it uses thread M2 and therefore it is easier to put on, always remain centered and straight in to the guide pin and does not damage the plastic.
Logically, as it is a metric screw, you can also give other applications leveraging small thickness of the head (0.5 mm) and diameter (5.5 mm). As the name suggests, this screw are valid for all types guides they need screw.
Perfect in the guide.
Also, it is suitable for holding the motor.
